Inkbird 308 Digital Thermostat

• Plug and play design, easy to use
• Dual relay output, be able to connect with refrigeration and heating equipment at the same time
• Support reading with Centigrade or Fahrenheit unit
• Maximum output load: 1100W(110V)
• Dual display window, be able to display measured temperature and set temperature at the same time
• Temperature calibration
• Compressor delay protection for refrigeration control
• High and low-temperature alarms are available
• Over-temperature and sensor fault alarm
• The heating/cooling differential function could be set separately for refrigeration and heating to protect the temperature controller from violent change

• Temperature Control Range: -50~120 °C / -58~248 °F
• Temperature Resolution: 0.1°C / 0.1°F
• Temperature Accuracy: ±1°C (-50~70°C) / ±2°F (-58~160°F)
• Temperature Control Mode :On/Off Control, Heating and Cooling
• Input Power: 100 ~240VAC, 50Hz/60Hz
• Temperature Control Output: Max. 10A, 100V~240V AC
• Buzzer Alarm: High and Low Temperature Alarm
• Sensor Length: 2m / 6.56ft

• --Socket: 112 x 46 x 27 mm( 4.1 x 1.8 x 1.0 inch)
  --Humidity 20~85%Rh (No Condensate)
  --Storage Temperature: -20~60°C / -4~140°F
  --Work 1[Heating],Work 2[Cooling]

IBS-TH2 (Temperature and Humidity Thermometers)

• IOS and Android APP (Engbird) to monitor temperature and humidity at any time
• APP supports multi language , °C /°F mode and product with magnet base
• One phone can connect more than one IBS-TH2 at the same time. And one IBS-TH2 can be connected with more than one phone at the same time
• Support for application scenario selection and addition
• Alarm and data history view available.
• Battery is easy to replace

• Temperature measurement range: -40℃~60℃/-40℉~140℉
• Temperature Accuracy: ±0.5℃/±0.9℉
• Humidity measurement Range : 0~99%RH
• Humidity Accuracy: ±4.5%RH(20%~80%RH)/±7.5%RH( 0%~100%RH)

• Hold data for 20 days if the sampling interval is 1min, and the max date storage is 30000 points. Different sampling interval 
• can be setting.(10s/ 30s/ 1min/ 2mins/ 5mins/ 10mins/ 30mins) The saving data time will be different if you choose
•  different sampling interval.

The thermometer will work for at least 3 to 6 months with 2 AAA batteries (Not included) , no more frequently battery changing 

needed. You also don’t need to buy glue or nails to help fix the thermometer if there’s metal nearby, the thermometer can be

 adsorbed on metal surfaces with the built-in magnet.