Inkbird Digital Humidity Controller WiFi Humidistat 110V Hygrometer

• Humidity Sensor
• Solid Sockets
• Reliable Plug
• Package Content

Humidity Measure Range: 5%-99.99%RH

Humidity Control Range : 5%-99%RH

Accuracy: ±3%RH

Resolution: 1%RH

Sensor Length：6.56ft (2m)

Power Output: Max. 10A, 100V ~240V AC

Work 1:To control humidifier

Work 2:To control dehumidifier

Socket: 3.3x1.7x1inch (85x42x24mm)

US Standard

Power Consumption：<3W

Input Power Cable Length： 5ft (1.5m )

Output Power Cable Length：1ft (30cm)

Package included:

1x IHC-200-WiFi humidity controller

1 x User manual

Wi-Fi Humidity Controller IHC-200

Notes:
- Do not put probes or metal wire into the fire.
- Do not put probes into the water, it may lead to inaccurate measurements.
- Only support 2.4GHz Wi-Fi (Support IEEE 802.11b/g/n).

Multi-scenario Application

• Dual Display Windows】:
  Display the set humidity value and the measured humidity value at the same time with 2 screens.
• Dual Relay Output】:
  Support both humidifying equipment and dehumidifying equipment.
• Humidity Calibration】:
  Support humidity calibration and dehumidification control delay protection.
• Remote Control】:
  Connect the IHC-200 Wi-Fi humidity controller to 2.4GHz Wi-Fi, and monitor or adjust the humidity on your phone through the app at any time anywhere.
• High/Low Humidity Alarm】:
  Set a High/Low Humidity Alarm, which alarms and reminds you if the humidity value exceeds the setting value, and alarms when a probe error occurs.
• Alarm Stop】:
  Press any button to turn off the alarm sound or you can turn it off on your phone.

• Support humidity calibration and dehumidification control delay protection.
• Maximum Power: 1200W(120Vac)

For Example:
You would like to set the range for 47% to 55%

• Set "HS" (Target Humidity) as 50.
• Set "HD" (Humidification Differential Value) as 3.
• Set "DD" (Dehumidification Differential Value) as 5.